Was this page helpful?
Thank you!

Comments or suggestions?



Enter Email Address (optional)
email

Using the calculator to calculate amounts

  1. Click in the field where you want to make the calculation.

    You can do calculations in any numeric field, such as dollar amounts in registers and quantities in transactions. You can't calculate time entries, check numbers, or dates.

  2. Open the calculator:

    Press the = key.

    or

    Type a number followed by +, -, *, /, or =.

  3. On the paper tape that appears, enter as many numbers and operators (+, -, *, /, or =) as you need to complete the calculation. You can enter numbers as large as 9,999,999.99.

    To:

    Press:

    Get a subtotal

    =

    Clear an entry

    C

    Clear the tape

    C (twice)

    Repeat the last
    calculation

    The operator key as many times as needed. For example, to add 100 three times, you would type:

    100 + + +

    Enter a negative
    number

    The key for the operation you want to perform, press -, and enter the number. For example, to multiply 100 by minus 6.25, you would type:

    100 * - 6.25

    Cancel the
    calculation

    Esc

  4. To enter the calculation result in the field, press Enter or Tab, or click anywhere outside the boundary of the tape.

KB ID# H_CALC_COMMON_USING
9/25/2016 8:39:54 PM
QYPPRDQBKSWS07 9138 Pro 2017 647b74